01559192562 01030503551 01555441359 0572060545 info@emcegy.net 315/34 13 ST, Abu Al-Kheir, New Damietta, Egypt
Poultry Farms Sector Polyurethane Foam System

Thermal & Waterproofing Insulation for El Kasby Tanks – Damietta

Damietta, Egypt
01 Mar 2024
El Kasby Group for Poultry

Across 900 m², EMC carried out thermal and waterproofing insulation works for El Kasby Group’s tanks in Damietta using a sprayed polyurethane foam system to create a continuous insulation layer across the designated tank surfaces and details.

Thermal & Waterproofing Insulation for El Kasby Tanks – Damietta 1
Thermal & Waterproofing Insulation for El Kasby Tanks – Damietta 2
Thermal & Waterproofing Insulation for El Kasby Tanks – Damietta 3
Thermal & Waterproofing Insulation for El Kasby Tanks – Damietta 4
Thermal & Waterproofing Insulation for El Kasby Tanks – Damietta 5
Thermal & Waterproofing Insulation for El Kasby Tanks – Damietta 6
Thermal & Waterproofing Insulation for El Kasby Tanks – Damietta 7
Thermal & Waterproofing Insulation for El Kasby Tanks – Damietta 8
Thermal & Waterproofing Insulation for El Kasby Tanks – Damietta 9
Thermal & Waterproofing Insulation for El Kasby Tanks – Damietta 10
1 / 10

Thermal & Waterproofing Insulation for El Kasby Tanks – Damietta

EMC carried out thermal and waterproofing insulation works for El Kasby Group for Poultry’s tanks in Damietta, covering a total area of 900 m².

The works included surface preparation followed by the application of a sprayed polyurethane foam system to form a continuous insulation layer across the tank surfaces, corners, and details, helping reduce heat transfer and water penetration while protecting the treated surfaces from external conditions.


Scope of Work

  • Initial inspection of the tanks and insulation areas.

  • Assessment of surfaces and details before application.

  • Cleaning and preparation of surfaces for insulation.

  • Treatment of visible vulnerable areas and voids where required.

  • Preparation of corners, details, and junctions.

  • Preparation of areas surrounding connections and fixing points.

  • Verification of surface readiness before spraying.

  • Application of sprayed polyurethane foam to tank surfaces.

  • Formation of a continuous insulation layer across designated areas.

  • Coverage of corners and irregular details within the insulation system.

  • Treatment around connections and penetration points.

  • Inspection of polyurethane foam layer continuity.

  • Final inspection of insulated surfaces.

  • Completion of any areas requiring additional treatment.

  • Final project handover.

Case Study

The Challenge

The project required an insulation system capable of adapting to the tanks’ surfaces, corners, and various details while providing continuous coverage to help reduce external heat transfer and water penetration.

The Solution

The tank surfaces and surrounding details were prepared before applying sprayed polyurethane foam to create a continuous insulation layer covering the designated surfaces, corners, and irregular details.

The Result

A continuous polyurethane foam layer was applied across the designated tank areas, helping improve thermal and waterproofing performance while reducing the impact of external conditions on the treated surfaces.

Project Videos

The Best Thermal and Waterproofing Solution for Tanks and Storage Vessels by EMC Using Polyurethane

Call WhatsApp Quote